Xerox 8550 Error Codes List
In this article I will tackle the pesky 07,010.43 error that tend to plague these printers.Alright, the 07,010.43 error is a printhead tilt error. Amazon, the Amazon logo, Endless, and the Endless logo are trademarks of Amazon.com, Inc. Error 0x61011beb, 0x61011bec, 0x610000f6, 0x61000f... If everything prints then clean up the covers and feed rollers and you should be could to go. http://knoxactive.net/error-codes/xerox-8550-printer-error-codes.php
Cleaning the printhead on the Phaser 7800> Phaser 8500/8550/8560 07,010.43 error code August 8th, 2012 at 1:31 pm This error pops up when the printhead in your printer cannot move back Error code list by brand Xerox phaser 8550 & 8560: error code 09,038.46 Solution: Turn off the printer. I just had it serviced and it was working great other than a few compatibility issues prior to this problem so I do not believe it is hardware. Gently lift the pivot plate and look behind it.
Xerox Phaser 8500 Error Codes
Turn the Control Panel over and place it on top of the printer. Andy from Peach IT Servicesays: February 7th, 2013 at 11:31 am THANK YOU!!!!! Does anyone know what this error mean. You are the BOMB...thanks millions (or at least the amount of an Xerox service call) June 23, 2011 at 11:19 AM Steve said...
This is extremely difficult as it is usually melted to the heater, not to mention really hard to reach. iteminc 6,977 views 4:15 Xerox Phaser 8400 8500 8550 8560 37,002 37,004 37,007 errors or light streaks - Duration: 8:38. Xerox Phaser 8500 Error Codes This will allow us to lift up the ink loader and actually see the printhead unit. Xerox 8580 On the left you should see a big black plastic piece that blocks your view of the front of the printer.
If your still unsure after trying to move it then loosen the three screws slightly to see if they start to come out or if they move freely with a broken have a peek at these guys So am I going to have to scap a $1000+ printer? When the flag is depressed, the front panel will read
Watch Queue Queue __count__/__total__ Find out whyClose Xerox Phaser 8400 8500 8550 8560 Error Codes 09,0xx ink loader replacement iteminc SubscribeSubscribedUnsubscribe709709 Loading... So how can you avoid having the issue? I found the sequence for gettinginto the service modeand was able to clear the codesand now it is up and running again.
The black gear on top typically doesn't have to be aligned but the one on the bottom might.
All you have to do is take a look at what to avoid to begin troubleshooting the problem yourself. Caution, if the printer has been on, the ink inside is at a liquid state. Today it has happen again and my warranty is now up by 1 week. Run the print demonstration pages.
This allows the machine to a cold start state. Epoxy back on, drilled hole through side frame and used longer screws to mount. Put the cover off to the side and leave the control panel plugged in and on top of the machine about where it originally was.Remove the rear screw. this content If not you then want to see if any of the ink left at the heaters is cracked.